PIPELINE DAMAGE CONTROLLER (CОТ 1.0)
|
|
|
|
PURPOSE
Pipeline damage controller (COT 1.0) is used to control the pipelines insulated with PU-foam, as well as automated pipeline condition controllers.
TECHNICAL CHARACTERISTICS
| Number of measurement channels | 4 |
| Length of pipeline, m | up to 2500 |
| Measurement range of resistance of signal wires, Ohm | 1...500 |
| Measurement range of PUF insulation resistance, Ohm | 500...1 000 000 |
| Protection index relative to external influence | IP55 |
| Supply voltage (alternating current), V | 220 |
| Current consumption (average), mA, not more than | 200 |
| Data transmission channel | GPRS |
| Operational temperature range,°С | -40...+70 |
DETECTABLE DEFECTS
- soakage of insulation
- breakage of signal wires
- short-circuit effects between signal wire and metallic pipe
PECULIARITIES
- device is certified
- data transmission channel: GSM; Ethernet/RS485
- number of connectable pipelines: 2, 4
- each measurement channel of the controller is galvanically decoupled
DEVELOPER
Department of Advanced Development of Monitoring Systems
CONTACTS
28, Kozlova str., 220037, Minsk, Republic of Belarus
☏ +375 17 374 44 25
🖷 +375 17 374 44 25
🖂 khaz_igor@bsuir.by
✎ Offices 103-113
OTHER DEVELOPMENT AREAS